SuperClock Upgrade

A brand new ultra-low jitter clocking system for the legendary Pink Triangle DaCapo DAC

The Pink Triangle DaCapo DAC went to great lengths to minimise the jitter present in their discrete single-bit DAC module. This helped provide the smooth yet detailed sound that made this DAC legendary.

Modern electronics and design has moved on since the DaCapo was first introduced. Using this upgrade, we achieve jitter performance more than ten times better than that of the original DAC resulting in a sweeter, clearer and more transparent sound while retaining all of the original characteristics.

The mod consists of a new DAC module that can be fitted to replace the standard single-bit DAC. This includes an ultra-low-jitter oscillator onboard, feeding directly into the DAC. A screened cable feeds this out to a second board mounted in the front panel connector to allowing you to configure whether each input is configured as a SuperClock-capable input, or left as a standard DaCapo input card. The image below shows input 2 configured for SuperClock while input 1 retains a standard SPDIF input card.

Finally, a second screened cable feeds this clock back to the input card where it can be fed out in turn to any Clock-Locked source through a dedicated SuperClock compatible input card.

Please note, the jitter is reduced significantly from the standard DAC module even when using a normal Pink Triangle input card, however the magic only comes alive when a specialised clock-lockable input card is fitted. This requires a clock-lockabe transport such as the Pink Triangle Cardinal, APEX Streamer or a APEX USB-to-SPDIF interface.

Take a look at a description of what’s going on on our YouTube Channel

 

SuperClock Upgrade + Input

SuperClock Upgrade and Input Card, fully fitted

SuperClock DAC Module, SuperClock Distribution and Digital OptoLock input card, fully fitted and tested.

How does this work?

Once you have purchased this item, I will supply you with an address. It’s your responsibility to package up your DaCapo and send it to me by an insured and tracked postal service.  I will then fit the new SuperClock Upgrade and test that all is fully working to spec.

SuperClock Upgrade

SuperClock Upgrade for Pink Triangle DaCapo

SuperClock DAC Module and SuperClock Distribution

230V A.C. input  (120V available on request)

What you get?

You will receive fully-populated PCBs which fit above the existing DAC module. This is pre-tuned to work with your DAC.

How do I fit it?

Full fitting instructions are provided. You will require a drill, soldering iron, tweezers and a steady hand. This modification is not recommended for beginners!  If you aren’t confident fitting this yourself, or if you are unsure if the DAC module is your issue, please contact me and we can discuss further. I have helped several people bring their beloved DACs back to life and I’m always happy to help if I can.

OptoLock for SuperClock

OptoLock input card for SuperClock

22Mhz Toslink Optical Clock Output

SPDIF Toslink input

Suitable for use with APEX Streamer and APEX USB-to-SPDIF Interface

Supplied with screened cable to connect to the SuperClock distribution board

Bespoke SuperClock Input Cards

SuperClock input card built to your spec

We can build new input cards to meet your specification, including cards for the Pink Triangle Cardinal CD Transport, USB input cards and more. We can even upgrade your existing APEX ClockLocked input card.

Take the chance - you won't be disappointed!

0
0
Your Cart
Your cart is emptyReturn to Shop